70 found, showing page 4 of 5
10" 60T Freud Carbide Circular Saw Blade
Fine finish blades let trim crews get the most out of sliding or chop style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing grabbing or blowout. Diablo particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood and molding.
- Applicable Materials: Melamine Plywood Wood
- Arbor Size: 5/8 in
- Cutting Edge Material: Carbide
- Diameter: 10 in
- Finish: Perma-Shield
- Grade: Fine
- Kerf: 0.098 in
- Material: Steel
- Number Of Teeth: 60
- Speed Rating: 7000 rpm
- Suitable for: Miter Saw Portable Table Saw Slide Miter Saw Stationary Table Saw
- Teeth Type: Super Thin Kerf
- Thickness: 0.071 in
- TiCo hi-density carbide specifically designed for each application to increase performance
- Perma-SHIELD non-stick coating protects from heat, gumming and corrosion
- Super thin laser-cut kerf gives extremely fast, durable and clean cuts
- Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability
- Hardened steel body warrants a longer life and sharper cutting edge
View Details
Call for Price
10" X 72T COMPOSITE BLADE
Composite Decking Blade For Cutting Composite Decking Materials. For Maximum Performance And A High Quality Finish. Modified Triple Tooth Grind Design. Perma-Shield, Non-Stick Coating And Specific TiCo Hi-Density Carbide To Deliver More Efficient And Cleaner Cuts With No Swirl Marks, Less "Gumming" Of Blade Teeth And Longer Cutting Life.
- Trex Blade
- Brand:"DIABLO"
- 5/8'' ARBOR
- Dia In : 10
- Teeth : 72
- Cleaner Cuts With No Swirl Marks
- Freud TiCo Hi-Density Special Blend Carbide Is Specially Formulated To Maximize Cutting Life In Composite Materials And Plastics
- Laser-Cut Stabilizer Vents Absorb Noise And Vibration Keeping The Blade Straight And True For Superior Quality Cuts
- Modified Triple Chip Grind (MTCG) Enable The Composite Material To Remain Cool While Cutting, Creating Melt Free Cuts
- Advanced Laser-Cut Thin Kerf Design Removes Less Material For Fast And Effortless Cuts
- Non-Stick Perma-SHIELD Coating Reduces Drag And Shields The Blade Against Heat, Gumming And Corrosion
- Red Saw Blades Are A Registered Trademark Of Freud America, Inc
- For Use On Composite Decking, Composite Material And Cellular Pvc
- For Use With Miter Saws And Table Saws
View Details
Call for Price
Diablo 10" Medium Aluminum Saw Blade
Cut non-ferrous metals such as copper pipe, aluminum extrusions, brass plates and plastics, as well as laminate flooring and double-sided laminates and melamines. Diablo's 10 in. 80-Tooth Carbide Non-Ferrous/Plastic Saw Blade features teeth that were made of titanium cobalt high-density carbide for a durable and long-lasting solution. Cut from hardcore steel with high-precision lasers, the blade's ultra-thin kerf design provides fast, effortless cuts. A non-stick Perma-SHIELD coating protects the blade from heat, corrosion and gumming to reduce friction and pitch buildup. Laser-cut stabilizer vents absorb noise and reduce vibration for added user-friendliness.
- Fits 5/8 in. arbors
- Specifically designed for on-the-job cutting of non-ferrous metals such as copper pipe, aluminum extrusions, brass plates and plastics, as well as laminate flooring (Pergo, Armstrong, Swiftlock) and double-sided laminates and melamines
- Triple chip grind tooth design for clean, chip-free cuts and long life
- Laser-cut stabilizer vents for reduced vibration and precise cuts
- 80 TiCo (titanium cobalt) high-density carbide teeth for razor-sharp cuts and durability
- Perma-SHIELD non-stick coating for prevention against gumming, heat and corrosion
- Laser-cut thin kerf design for fast, clean cuts
- 10 in. Dia
- Hook angle of -5 degrees
- 0.071 in. plate
- Covered by a limited lifetime manufacturer warranty
View Details
Call for Price
FREUD BLADE 10X80T ULTRA FINE
Thin Kerf Saw Blade For Miter And Table Saws. Used For Crosscutting Oak, Pine Melamine, Veneer, Plywood And Delicate Molding. Laser Cut Stabilizer Vents For Reduced Vibration And Precise Cuts.
- Ultra Finish - Micrograin Titanium Carbide
- Construction Grade
- Brand:``DIABLO''
- 5/8" Round Arbor
- Dia In : 10
- Teeth : 80
- Use With 5/8 In Arbors
- Provides Smooth, Accurate Wood Cuts
- TiCo High Density Carbide For A Longer Cutting Life And A Sharper Edge
- Precision Shear Point Tooth Geometry Delivers Flawless Finishes In Hardwoods, Softwoods, Veneers And Melamine's
- Precision Tensioning Keeps Blade Flat And True
View Details
Call for Price
10" X 84T LAMINATE BLADE
Blade Is Used To Cut Laminate Flooring, Double Sided Laminates, And Melamines Cleanly. The Triple Chip Grind (TCG) Tooth Design Gives Clean, Chip Free Cuts And Longer Life In Abrasives. Laser Cut Stabilizer Vents For Reduced Vibration And Precise Cuts. Durable Micrograin Titanium Carbide Teeth For Razor Sharp Cuts And Longer Life. Perma Shield Permanent Coating Prevents Gumming And Corrosion. Laser Cut Thin Kerf Design Gives Fast Clean Cuts.
- Laminate Flooring
- Brand:"DIABLO"
- 5/8" ARBOR
- Dia In : 10
- Teeth : 84
- TiCo Carbide Formula Offers A Blend Of Carbide With Low Cobalt Content That Produces A Very "Hard" Carbide For Long Cutting Life
- This Blade Features A Thin Kerf Triple Chip Design That Is Specially Designed To Cut Laminate Flooring (Pergo, Armstrong, Swift Lock), Double-Sided Laminates And Melamine Cleanly
- Features Freud's Perma-Shield Coating, Anti-Vibration Reeds, Heat Expansion Slots, And Laser Cut Technologies
- Thin Kerf Design To Increase Machine Performance. Ideal For Sliding Miter Saws And Underpowered Table Saws
View Details
Call for Price
FREUD BLADE 10X90T FINE FINISH
For Miter/Slide Miter And Table Saw. Non-Stick Permashield Coating. Axial Shear Face Grind Tooth Geometry..087" Ultra Thin Kerf, 10-Degree Hook Angle, And 7,000 Max Rpm.
- Ultra Fine Finish
- Titanium Carbide
- Brand:"DIABLO"
- 5/8" ARBOR
- Dia In : 10
- Teeth : 90
- Dubbed The "Ultimate Flawless Finish" Circular Saw Blade, And With Good Reason
- Axial Shear Face Grind (ASFG) Technology Allows For Splinter Free Cuts On The Finest Moldings With No Need For Reworks
- Ultra-Thin Kerf Means You Can Get More Productivity Out Of A Smaller, More Portable Saw
- Cuts A More Accurate Line With Less Material Waste
- For Miter/Slide Miter And Table Saw
- Non-Stick Perm Shield Coating
View Details
Call for Price
FIBER CEMENT BLADE 12" DIAMOND
Diamond Tipped Fiber Cement Blades Generate Up To 50 Percent Less Respirable Dust, Features A Unique, Spark-Eroded Triple Chip Grind (TCG) For Long Life; Use In Heavy Duty Applications Like Cutting Multiple Pieces Of Fiber Cement Board.
- Fiber Cement-Polycrystalline
- Brand:"HARDIEBLADE"
- 1" Arbor
- Dia In : 12
- Teeth : 8
- Diablo Hardie Blade Is The Only Approved PCD (Polycrystalline Diamond) Tipped Fiber Cement Blade Recommended By James Hardie Building Products
- Diablo Fiber Cement Blades Generate Up To 50% Less Respirable Dust
- Durable TiCo Hi-Density Carbide Teeth For Razor-Sharp Cuts And Longer Blade Life
- Perma-Shield Permanent Coating Prevents Gumming And Corrosion
- Laser-Cut Thin Kerf Design Gives Fast, Clean Cuts
- Covered By Limited Lifetime Warranty
- For Use On 12 In Miter Saw
- Hardened Steel Body Warrants A Longer Life And Sharper Cutting Edge
View Details
Call for Price
FREUD BLADE 12X100T FINE FINISH
For Miter/Slide Miter Saw. Non-Stick Permashield Coating. Axial Shear Face Grind Tooth Geometry. .098" Ultra Thin Kerf, 7-Degree Hook Angle, And 7,000 Max Rpm.
- Ultra Fine Finish
- Titanium Carbide
- Brand:"RIPTIDE"
- 1" Arbor
- Dia In : 12
- Teeth : 100
- Ultra-Thin Kerf Design For Easy Cuts
- Shear-Face Grind Design Delivers Effortless Cuts With A Reduced Amp Draw On Tools For Less Material Waste And To Help Maximize Tool Performance
- Red Saw Blades Are A Registered Trademark Of Freud America, Inc
- Perma-Shield Coating Helps Blade Resist Gumming And Wear
- An Essential For Fine Molding Workers Who Hate Reworking Pieces
View Details
Call for Price
Diablo 12" General Purpose Saw Blade
12" DIABLO CIRCULAR BLADE 2PK
View Details
Call for Price
FREUD BLADE 12X44T COMBINATION
Thin Kerf Saw Blade For Miter Saws And Portable Tools. Alternate Top Bevel, .071" Plate, .098" Kerf, 15 Degree Hook Angle, 6,000 Max RPM.
- General Purpose - Micrograin Titanium Carbide
- Construction Grade
- Brand:``DIABLO''
- 1" Round Arbor
- Dia In : 12
- Teeth : 44
- Designed To Fit 1 In Laser Cut Arbors For Accurate Blade Rotation
- Cuts Wood Cleanly And Efficiently
- Ti-Co High-Density Carbide Is Specifically Designed For Each Application To Increase Performance And Maximize Cutting Life
- Perma-Shield Non-Stick Coating Protects Blade From Heat, Gumming And Corrosion
- Super Thin Laser Cut Kerf For Fast, Durable, Clean Cuts
- Laser Cut Stabilizer Vents Trap Noise And Reduce Vibration For Accurate Cuts, While Extending Carbide Cutting Life
View Details
Call for Price
FREUD BLADE 12X60T COMBO BLADE
For Miter/Slide Miter Saw. Non-Stick Permashield Coating. .098" Thin Kerf, 15-Degree Hook Angle, And 6,000 Max Rpm.
- Combination
- Titanium Carbide
- Brand:"DIABLO"
- 1" Arbor
- Dia In : 12
- Teeth : 60
- TiCo Hi-Density Carbide With Titanium Construction For A Long-Lasting Blade Life
- ATB+R Grind Delivers Straight Rips, Smooth Cuts And Helps Improve Performance
- The Laser Thin Kerf Provides Fast, Clean Cuts
- Laser-Cut Vents Limit Vibration And Keeps Cuts Straight And True
- Perma Shield Nonstick Coating Keeps The Blade From Gumming Up, Overheating, And Corroding
View Details
Call for Price
D1280X FREUD 12X80 FINE FIN BLDE
Thin Kerf Saw Blade For Table Saws. Used For Crosscutting Oak, Pine, Malamine, Plywood And Moulding. Alternate Top Bevel, .087" Plate, .0118" Kerf, 15 Degree Hook Angle.
- Fine Finish - Micrograin Titanium Carbide
- Construction Grade
- Brand:``DIABLO''
- 1" Round Arbor
- Dia In : 12
- Teeth : 80
- Finishing Saw Blade For Circular Saws
- High-Density Carbide Blade With Tri-Metal Brazing For A Strong Joint Between The Tips And Plate
- Super-Thin Laser-Cut Kerf For Fast, Clean Cuts
- Heat-Expansion Slots Allow Blades To Expand And Contract During Use Keeping The Cut True And Straight
- Laser-Cut Stabilizer Vents Trap Noise And Reduce Vibration For Accurate Cuts And Blade Durability
View Details
Call for Price
12" X 84T COMPOSITE BLADE
Composite Decking Blade For Cutting Composite Decking Materials. For Maximum Performance And A High Quality Finish. Modified Triple Tooth Grind Design. Perma-Shield, Non-Stick Coating And Specific TiCo Hi-Density Carbide To Deliver More Efficient And Cleaner Cuts With No Swirl Marks, Less "Gumming" Of Blade Teeth And Longer Cutting Life.
- Trex Blade
- Brand:"DIABLO"
- 1'' Arbor
- Dia In : 12
- Teeth : 84
- Cleaner Cuts With No Swirl Marks
- Freud TiCo Hi-Density Special Blend Carbide Is Specially Formulated To Maximize Cutting Life In Composite Materials And Plastics
- Laser-Cut Stabilizer Vents Absorb Noise And Vibration Keeping The Blade Straight And True For Superior Quality Cuts
- Modified Triple Chip Grind (MTCG) Enable The Composite Material To Remain Cool While Cutting, Creating Melt Free Cuts
- Advanced Laser-Cut Thin Kerf Design Removes Less Material For Fast And Effortless Cuts
- Non-Stick Perma-SHIELD Coating Reduces Drag And Shields The Blade Against Heat, Gumming And Corrosion
- Red Saw Blades Are A Registered Trademark Of Freud America, Inc
- For Use On Composite Decking, Composite Material And Cellular Pvc
- For Use With Miter Saws And Table Saws
View Details
Call for Price
FREUD BLADE 12" X 96T LAMINATE
Triple Chip Grind (TCG) Tooth For Clean, Chip Free Cuts And Longer Life In Abrasives. Laser Cut Stabilizer Vents For Reduced Vibration And Precise Cuts. Durable Micrograin Titanium Carbide Teeth For Razor Sharp Cuts And Longer Life. Perma Shield Permanent Coating Prevents Gumming And Corrosion.
- Laminate Floor
- Brand:"DIABLO"
- 1" Round Arbor
- Dia In : 12
- Teeth : 96
- Designed To Fit 1 In Laser Cut Arbors For Accurate Blade Rotation
- Cuts Wood Cleanly And Efficiently
- Ti-Co High-Density Carbide Is Specifically Designed For Each Application To Increase Performance And Maximize Cutting Life
- Perma-Shield Non-Stick Coating Protects Blade From Heat, Gumming And Corrosion
- Super Thin Laser Cut Kerf For Fast, Durable, Clean Cuts
- Laser Cut Stabilizer Vents Trap Noise And Reduce Vibration For Accurate Cuts, While Extending Carbide Cutting Life
- These Diablo Blades Are Specially Designed To Cut Laminate Flooring (Pergo, Armstrong, Swift Lock) And Double-Sided Laminates And Melamines Cleanly
- Triple Chip Grind (TCG) Tooth Design For Clean, Chip Free And Long Life Cuts In Abrasive
- Covered By Freud's Limited Lifetime Warranty
View Details
Call for Price
FREUD BLADE 12X96T NON-FERROUS
For On-The-Job Cutting Of Wood, Non Ferrous Metal Such As Copper Pipe, Aluminum Extrusions, Brass Plate, Plastics And Laminates. For Miter/Slide Miter Saws. Triple Chip Grind Tooth Design. .091" Thin Kerf, Negative 5-Degree Hook Angle And 6,000 Max Rpm.
- Ultra Finish/Laminate/Non Ferrous Metal
- Titanium Carbide
- Contractor Grade
- Brand:"DIABLO"
- 1" Round Arbor
- Dia In : 12
- Teeth : 96
- Laser Cut Stabilizer Vents Trap Noise And Vibration Keeping It Cool And Reducing Blade Warp
- Laser Cut Heat Expansion Slots Allow Blade To Expand Due To Heat Build-Up Keeping The Cut True And Straight
- Durable Micro Grain Titanium Carbide For Extreme Durability, Razor-Sharp Cuts, And Long Life
- Tri-Metal Shock Resistant Brazing Allows Carbide Tips To Withstand Extreme Impact For Maximum Durability
- Laser Cut Arbor For Accurate Blade Rotation Reducing Vibration And Premature Wear
- Triple Chip Grind Tooth
View Details
Call for Price
